Selected Body Type

Service Body

Applied Filters

Body Types

  • Upfitted Cargo Van

    Upfitted Cargo Van wireframe image
  • Service Truck

    Service Truck wireframe image
  • Service Utility Van

    Service Utility Van wireframe image
  • Flatbed Truck

    Flatbed Truck wireframe image
  • Contractor Truck

    Contractor Truck wireframe image
  • Landscape Dump

    Landscape Dump wireframe image
  • Box Truck

    Box Truck wireframe image
  • Box Van

    Box Van wireframe image
  • Stake Bed

    Stake Bed wireframe image
  • Combo Body

    Combo Body wireframe image
  • Adrian Steel

    Adrian Steel logo image
  • Knapheide

    Knapheide logo image
  • Morgan Truck Body

    Morgan Truck Body logo image
  • Royal Truck Body

    Royal Truck Body logo image
  • Scelzi

    Scelzi logo image
  • Supreme

    Supreme logo image
  • CM Truck Beds

    CM Truck Beds logo image
  • DuraMag

    DuraMag logo image
  • Harbor

    Harbor logo image

Manufacturers and Lines

Adrian Steel

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Knapheide

Morgan Truck Body

Morgan Truck Body

Morgan Truck Body

Morgan Truck Body

Royal Truck Body

Royal Truck Body

Royal Truck Body

Royal Truck Body

Royal Truck Body

Royal Truck Body

Scelzi

Scelzi

Supreme

Supreme

CM Truck Beds

DuraMag

Harbor

Harbor

Harbor

Harbor

Harbor

Body Types and Lines

Upfitted Cargo Van

Service Truck

Service Utility Van

Flatbed Truck

Upfitted Cargo Van

Contractor Truck

Landscape Dump

Box Truck

Landscape Dump

Box Van

Stake Bed

Service Truck

Contractor Truck

Landscape Dump

Combo Body

Service Utility Van

Stake Bed

Service Truck

Contractor Truck

Box Van

Service Utility Van

Flatbed Truck

Service Truck

Service Truck

Contractor Truck

Service Utility Van

Combo Body

Stake Bed

Adrian Steel: Commercial Shelving

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs.

Or, choose a pre-designed trade package to start from. Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

Adrian Steel: General Service

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs.

Or, choose a pre-designed trade package to start from. Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

Adrian Steel: PHVAC

PHVAC Techs need to work in nearly every condition -- on rooftops, in basements and everywhere in-between. We’re designing the perfect upfit packages for your job that include shelving, bins, partitions, and other useful items. These packages will help you be more organized and efficient at your job.

Adrian Steel: Steel Storage Products

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs. Or, choose a pre-designed trade package to start from.

Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

Knapheide: Aluminum Service Body

Our aluminum service truck beds offer the most innovative design and superior construction.

Tested in the harshest lab environments, automotive proving grounds and by customers like you, our Aluminum Service Bodies are built to perform. Additionally, military-grade aluminum and structural adhesives that ensure maximum strength and longevity for your work truck.

What does this mean for you? The corrosion resistance of aluminum, an impactful increase in payload and a truck bed as durable as steel. When it comes to Knapheide, lightweight doesn’t mean light duty.

Knapheide: KUVcc

Love the organization capabilities in a utility van, but require a truck chassis for more cab space or four-wheel drive? We’ve designed KUVcc Utility Truck Bodies just for you.

You get all the same great benefits of a KUV, but in a package that’s compatible with a truck cab chassis. With more than enough secure compartments and cargo area storage, the KUVcc can handle all of your tools, equipment and parts while keeping them separated and organized. The KUVcc features solid steel construction so you know you will get years of durable service out of this enclosed utility body.

Productivity and efficiency is vital to your success, so choose a Knapheide KUVcc to add a boost to your bottom line.

Knapheide: Steel Service Body

With a rugged steel construction and external storage for your tools and equipment, the Service Body is a key component in your day-to-day productivity.

The external compartments offer protection from outside elements and allow technicians to access their equipment without having to climb into the truck bed.

Staying organized both on and between job sites is important. Get maximum efficiency with a Knapheide Service Body.

Knapheide: KUV

Say goodbye to crawling around in the back of your cargo van endlessly searching for tools, parts and equipment. The KUV creates optimized organization for the technician, dividing the storage space into manageable compartments that are externally accessible from either side of the body.

The technician pulls up to the jobsite, exits the cab and immediately has quick access to the tools and parts they need without having to crawl into the cargo area. Dedicated conduit chutes enable the technician to store longer items without cluttering the floor of the oversized cargo area.

Knapheide's KUV is constructed of rugged galvanneal steel so the technician can have confidence it will provide years of reliable service. More contractors and technicians utilizing an enclosed utility body as their work vehicle choose a Knapheide KUV. If you spend more time searching for tools and equipment, invest in a KUV and get more billable hours out of your day.

Knapheide: Heavy-Hauler Junior

Heavy-Hauler Junior flatbed truck bodies are designed with versatility in mind to meet various vocational needs.

Knapheide's Heavy-Hauler Junior Platform Body is equipped with external rub rails, integrated tie down points and stake pockets, along with a heavy-duty bulkhead and robust flooring options. Add steel stake sides to a Heavy-Hauler Junior Platform Body to transition into a dedicated Stake Body, or choose a hoist for dumping applications. The Heavy-Hauler Junior Platform Body is designed to be multi-faceted in order to suit a wide variety of vocations.

The Heavy-Hauler Junior offers all the features you need to tackle tough jobs without breaking your budget.

Knapheide: PGNB Gooseneck

PGNB Gooseneck Bodies from Knapheide come loaded with all the same great standard features found in PGNA models (integrated gooseneck and receiver hitch systems, internal stake pockets and punched bulkhead) plus integrated stop, tail, turn and backup lights in both the rear skirt and bulkhead and side rub rails for additional functionality and convenience.

Choose models for either single or dual rear wheel chassis, along with 8', 9' and 11' body lengths. Regardless if you're hauling a horse trailer or hay bales, PGNB Gooseneck Bodies are well equipped for the task at hand.

Knapheide: PGNC Gooseneck

PGNC Gooseneck Bodies from Knapheide have distinct side-skirt styling with integrated front and rear toolboxes. The sleek yet functional design provides storage for tools, chains, tie-down straps and more.

Unlike the competition, Knapheide fully immerses all Gooseneck Bodies, including the PGNC, in an exclusive E-Coat prime paint system for the industry's best rust and corrosion protection. When you need a Gooseneck Body with proven performance, turn to the Knapheide PGNC Gooseneck Body.

Knapheide: PGND Gooseneck

Knapheide PGND Gooseneck Bodies are the top of the line. You won't find a more feature-packed and deluxe model in the industry. PGND Gooseneck Bodies feature superior and innovative solid steel construction so you have confidence it will withstand your jobsite abuse.

From the ample compartment storage to the contoured bulkhead to the all LED lights, the PGND has everything you need in a Gooseneck Body and more. The reliable under the floor gooseneck hitch system can haul even your heaviest gooseneck trailer loads.

Knapheide: Value-Master X

Need a versatile Platform Body that can haul just about anything? Knapheide's Value-Master X Platform Body features solid steel construction and is available in many different lengths and widths to fit a variety of chassis applications.

Choose wood, steel or treadplate flooring and pick from numerous side accessories including stake sides, solid sides or refuse sides to customize for your hauling job. Pair this flatbed up with a hoist to add dumping functionality.

Regardless of your needs, the Value-Master X Platform Body from Knapheide has you covered.

Knapheide: KVE

The Knapheide Manufacturing Company brings the next generation of van storage solutions to today's mobile contractors. With a comprehensive lineup of van equipment, including shelving, boxes and van partitions, Knapheide Van Equipment offers the rugged equipment, van packages and vocational packages to keep you working

Knapheide: Contractor Body

Contractor truck bodies combine our most popular flatbed, the Value-Master X, and packages it up with options and accessories that contractors commonly desire to make their job easier.

Above and under-body toolboxes provide the contractor with easily accessible and secure tool storage. An overhead material rack accommodates for convenient storage for up to 1,500 pounds of longer materials. Side and rear stakes close off the cargo area so oversized equipment or materials won’t fall out during transport.

Select the Knapheide Contractor Body to get the most out of your work day.

Knapheide: Landscape Dump

Knapheide’s landscape truck bed isn’t your normal Landscaper Body.

It includes optimized standard features to take your landscaping or lawn care operation to a new level. Need the ability to transfer, dump and distribute bulk materials like mulch, dirt, rock and more? The integrated dump hoist provides effortless operation while an optional metering gate enables the landscaper to easily control filling wheelbarrows. Load and haul palletized materials? A 50? side access swing out door accommodates for quick forklift loading. Add additional functionality with an optional storage pack or underbody toolbox.

If you want to upgrade your landscaping vehicle, check out the Knapheide Landscaper Body.

Morgan Truck Body: Fastrak
FAST TURNAROUND

A reputation for designing and building the best box truck bodies in the industry means top OEM's are happy to work with Morgan to deliver the truck you need — FAST. Morgan's ability to gain immediate access to top-of-the-line chassis and components, directly benefits dry freight haulers who don't have time for delays. Fast turnaround means faster return on your investment!

SIX DIFFERENT PRE-CONFIGURED MODELS

Quick turnaround is not devoid of options. Morgan builds a series of exceptional features into each of six pre-configured models. With lengths ranging from 12 to 26 feet, heights from 97 to 103 inches, and widths from 96 to 102 inches, it's easy to choose a body that meets your size specifications.

When it comes to features, Morgan provides strength and durability that supersedes the need for variety. With Fastrak, there's no need to ask for 1-1/8" laminated hardwood flooring, aerodynamic design, Poly-Tuff corner caps, a built-in rain channel, anti-snag roof-bows and built-in safety features. They're all standard Fastrak features; and further proof that Morgan knows what it takes to build the best bodies in the business.

Morgan Truck Body: Gold Star
  • SUBFRAME - 3" I-beam Crossmembers On 12" Centers With 4" Longrail , Mylar Tape Is Applied Between All Steel Subframe Components And Extruded Aluminum Lower Bottom Rails To Prevent Corrosion
  • FLOOR - 1- 1/8” Laminated Hardwood Fastened To Subframe With 2 Countersunk Screws Per Floor Board Per Cross Member In A Staggered Pattern. Floor Boards Are Ship Lapped And Preundercoated For Protection From Elements.
  • THRESHOLD - Steel Galvanized Angle Flush To Rear
  • REAR DOOR - Overhead Roll-up Door
  • REAR FRAME - Galvannealed Steel -painted Imron White, Includes Built-in Header Design, Clearance Light Protector And Rain Deflector, Curbside And Roadside Grab-handles
  • ROOF - .032” One-piece Aluminum Sheet With Anti-snag Roof Bows On 24” Centers With Crowned Roof Design Which Prevents Water/Ice Pooling
  • SKINS - .040“ Aluminum, Pre-painted White
  • SIDE WALL - Extruded Aluminum Top And Bottom Rails With 1-3/8” Deep Galvanized Steel Z-shaped Vertical Posts Installed On 16” Centers
  • FRONT END - Aerodynamic Aluminum Radii and Morgan’s Patented Poly-tuff Corner Caps
  • BUMPER - 5” Structural Bumper With Pooched Surface And Closure Plate
  • INTERIOR LIGHTING - (1) Domelight With Indicator Switch Mounted In Cab Dash
  • EXTERIOR LIGHTING - Led Sealed Clearance Lights, Per Fmvss-108 Installed In Front Corner Caps, Side Top Rails And Five Across Rear Header.
  • MOUNTING - Full Mount-u Bolt
  • MUDFLAPS - Morgan 24" X 36" Black
Morgan Truck Body: LandscaperPRO

Landscapers, maintenance crews, contractors, material suppliers and tradesmen of all kinds know there's no room in the schedule to worry about durability or to work around the limits of your truck. Morgan's LandscaperPro dump truck body is engineered to provide superior strength regardless of the body size. Steel I-beam construction, heavy-duty 10-gauge steel flooring, steel rub-rails and LED lighting are just a few of the standard features that result in a body that's hard to beat!

Make work easier with our integrated double acting hydraulic cylinder scissor hoist, forklift-friendly side door access, unencumbered bed access, and underbody tool storage options to maximize bed space. When your work demands strength, durability, and versatility you can depend on, you know you can depend on Morgan!

Morgan Truck Body: CityMax

In an era of E-Commerce and Final Mile deliveries, you need a parcel van that is durable and efficient enough to meet your needs. Our cutaway Aluminum, FRP, and Morganplate parcel vans are just what you need to get the job done! Aluminum, Morganplate or Fiberglass Reinforced Plywood wall construction ensures solid choices when it comes to the functional qualities you prefer – AND the image you want your Dry Freight, box, straight-truck or van to present! With a front cab access door that limits exposure to the elements (and traffic) and various lighting, scuff, and cargo control options, you'll be prepared for anything and everything!

    Features Include:
  • A full width pooched-surface bumper with strategically positioned grab handles for easier and safer movement in and out of the cargo area
  • Your choice of a solid front bulkhead OR optional pass-through door for quick and easy access from the cab
  • .032 Aluminum roof skin with roof bows on 24" centers
  • 1 1/8" Laminated hardwood flooring
  • Galvannealed steel rear roll up door, painted Imron white, includes built-in header design, clearance light protector and rain deflector, curbside and roadside grab handles, and DOT underride
Morgan Truck Body: Mini-Mover
  • Side Panels - 3/8” FRP (White Gelcoat Finish) Panels
  • Side Frame - Extruded Aluminum Perimeter
  • Front Wall - 3/8” FRP (White Gelcoat Finish) Panels
  • Understructure - 1/4” Steel Strap Long Rails, 1 9/16” Roll Formed Steel Crossmember on 20” Centers
  • Mounting - Low-mount Body with Flat Top Steel Wheelboxes
  • Rear Frame - Galvanealed Steel, Painted White, Includes Recessed Incandescent Taillights
  • Grab Handles - Roadside and Curbside Rear
  • Rear Door - Whiting Plastic Coated Overhead Door
  • Lining Sides - Seamless White Fiberglass Lining
  • Rear Finish - Full-width Easy Access Step Bumper
  • Floor - 5/8” Marine Grade Exterior Plywood Undercoat
  • Roof - .032” Aluminum Roof Sheet with Roof Bows on 28” Centers
  • Exterior Lights - Per FMVSS-108, with Reflectors and Recessed Taillights in Rear Corner Posts
  • Mirrors - Factory Supplied Mirrors
  • Bulkhead - 6” Bulkhead, Setback
Morgan Truck Body: Parcel Aluminum

In an era of E-Commerce and Final Mile deliveries, you need a parcel van that is durable and efficient enough to meet your needs. Our cutaway Aluminum, FRP, and Morganplate parcel vans are just what you need to get the job done! Aluminum, Morganplate or Fiberglass Reinforced Plywood wall construction ensures solid choices when it comes to the functional qualities you prefer – AND the image you want your Dry Freight, box, straight-truck or van to present! With a front cab access door that limits exposure to the elements (and traffic) and various lighting, scuff, and cargo control options, you'll be prepared for anything and everything!

Features Include:
  • A full width pooched-surface bumper with strategically positioned grab handles for easier and safer movement in and out of the cargo area
  • Your choice of a solid front bulkhead OR optional pass-through door for quick and easy access from the cab
  • .032 Aluminum roof skin with roof bows on 24" centers
  • 1 1/8" Laminated hardwood flooring
  • Galvannealed steel rear roll up door, painted Imron white, includes built-in header design, clearance light protector and rain deflector, curbside and roadside grab handles, and DOT underride
Morgan Truck Body: Prostake Stake Bed

Designed and built to exceed the needs of service providers – landscapers, contractors, maintenance crews, and suppliers – there’s no doubt that Morgan’s ProStake platform body will be the BEST tool for your trade. With stake bodies ranging from 9 to 26 feet in length, and widths of 96” to 102”, your choice of flatbed or rack configurations, and a wide range of optional and industry-specific features designed to make your job easier and more efficient – Morgan has what you need to get the job done right!

Royal Truck Body: Service Body
  • Body Construction of A-60 Galvanized Steel Locks Out Rust and Corrosion
  • Single Doors on Front Compartment for Enhanced Resistance to Water and Dust
  • Weather Stripping for Dust and Water Resistant Compartment Interiors
  • Rain Gutters Above all Doors
  • Gas Springs on all Vertical Doors and Chain Stops on Horizontal Doors
  • All Compartment Doors are Double Paneled
  • Trademarked Recessed Stainless Steel Door Pockets with Internal Fasteners
  • Top Lids Have (2) Gas Shocks and (2) Rotary Latches Each Mounted on Lid Ends
  • Bright Tread Aluminum Diamond Plate Overlays on Top Lids
  • Bright Tread Aluminum Front Gravel Guards and Splash Guards
  • Lock-in-place Shelving, Adjustable on 2” Centers
  • 13.5” High Self-leveling Tailgate with Shear Resistant Machined Hinges and Protective Stainless Steel Cap
  • 12 Gauge Diamond Plate Floor on 10 Gauge Crossmembers
  • Composite Fender Flares
  • Zinc-plated Hinge Rods with Hinge Blocks
  • Lighting Package Installed on Bumper Kick-plate
  • 8” Rear Step Bumper
  • Removable Trays
  • Tie Downs in Bed Area
  • Fortress 5-Point Locking System with Zinc Plated Lock Rods
  • 1900 Emulsion Undercoating
Royal Truck Body: Contractor Body

Touting cargo space matched only by a flatbed, boxes above and below deck, portable trays in the flip-top compartments of the top boxes, and a heavy-duty over-cab ladder rack that is forklift loadable; the contractor body sets the bar high when it comes to versatility. Rain gutters above and weather stripping inside all doors ensure tools and equipment stay protected from the elements. Fold-down gates make it easy to load the bed area without being inconvenienced with loose gates.

The ladder rack comes with Snap-Loc standard on the side rails and heavy-duty rope hooks on rack legs, while the top boxes have D-ring tie-downs on the rear, providing multiple tie-down points to secure loads in the bed and on the rack. With space to secure welders, compressors, generators, or lawn equipment with room to spare; the contractor body is perfect for any number of vocations.

Royal Truck Body: Landscape Dump
    Landscape Dump Body Standard Equipment
  • 42” high Solid Plywood Gates with Wood Uprights on Landscape Dump Body
  • Double-acting Hoist raises and lowers the Dump Bed
  • Steel Upright Posts and Framing on Rear Hinged Gates
  • Heavy Duty Drop Rod Lock on Rear Gates
  • Rear Hinged Gates allow easy access to bed area
  • Expanded Metal Cab Shield
  • Royal Mud flaps
Royal Truck Body: Service Combo Body

With a 3' Work platform in place of the rear compartment, the Royal combo service body transforms a regular service body into a mobile work station. With removable gates and a variety of options, this body is perfect for the craftsmen who need ample storage and workspace. Rain gutters above and weather stripping inside all doors ensure tools and equipment stay protected from the elements while Ignition key coded, Fortress 5-point locking compartments and internal master lock as an option, provides unprecedented security.

Portable trays in top lids and ergonomic D-shaped handles are highlights of a body engineered with productivity and ease of use in mind. With a heavy-duty, forklift loadable over-cab ladder rack, bamboo slats with stainless-steel posts for the rear platform, and heavy-duty dock bumper as standard features; the Royal combo service body comes equipped to tackle just about any demands.

Royal Truck Body: RSV
    Standard Features:
  • A-60 galvannealed steel body construction locks out rust
  • Fortress 5-Point Locking System with zinc plated lock rods
  • Smooth body panels for company graphics
  • Rear Barn Doors
  • Rear access door to conduit compartment
  • Internal Master Lock System
  • Removable, high impact composite trays with dividers on inside shelves
  • Rain gutters above all doors
  • Automotive-style Neoprene weather stripping for dust and water resistant compartment interiors
  • Gas springs on all vertical doors and chain stops on horizontal doors
  • All compartment doors are double-paneled
  • Composite fender flares
  • Trademarked recessed stainless steel door pockets with internal fasteners
  • Tough Bright Tread aluminum front gravel guards and splash guards
  • Lock-in-place shelving, adjustable on 2” centers
  • 12 gauge diamond plate floor on 10 gauge crossmembers
  • Full width 11.75” rear step Grip Strut bumper
  • 1900 emulsion undercoating
  • Solid Bulkhead
  • Zinc-plated hinge rods with hinge blocks
  • 4 tie downs in bed area
  • 3-year / 36,000 mile limited warranty
Royal Truck Body: Stake Bed

The last things you need are surprises and expensive add-ons. You have no patience for nickel-and-diming, just like your customers. So Royal Truck Body gives you more standard features than any other service body builder. The kind of commonsense value that respects your hard work and tight margins.

The versatile Royal Stake Bed Body is tough and built with 11 gauge steel cross members on 16” centers for added strength. Easily lift and remove the individual Apitong® panels for loading and unloading. Apitong® has been the traditional wood of choice for flatbed truck flooring where product weight, durability, strength and value are the major concerns.

    Standard Stake Bed Features:
  • 42” High, 50/50 punched-steel headboard
  • 7” High-profile 10 GA. Side rails w/ Internal stake pockets
  • Recessed fuel Pocket
  • 4” 11 GA. Cross-members on 16” centers
  • Three self-tapping screws on wood at each cross member
  • Rope Hooks on Cross-members before & aft of rear wheels
  • Heavy-Duty dock bumper
  • Powder-coated frame
  • Apitong® hardwood tongue and groove floor
  • Under-bed rope hooks
  • 50/50 bulkhead with 14 gauge galvanealed perforated steel top section and solid steel bottom
  • Legal light package and reflectors
  • Frame construction is 2” x 3” steel tubing
  • Mud flaps with Anti-Sail Brackets
  • 42” high solid plywood gates with hardwood uprights and grab handles
  • 3 year/36,000 mile limited warranty

The CROWN Service Body, with features comparable to most other manufacturers but built with Scelzi craftsmanship and legendary attention to detail.

  • Three point latching system on all compartment doors
  • Gas shocks on open top compartments and vertical doors
  • All bodies equipped with a 6-inch step bumper, powder coated grey
  • Stainless steel tubing around wheel well openings
Scelzi: Signature

The Signature Series is our Premium line of truck bodies, with upgraded styling and construction materials.

  • Three point latching system on all compartment doors
  • Gas shocks on open top compartments and vertical doors
  • All bodies equipped with a 6-inch step bumper, powder coated gray
  • Stainless steel tubing around wheel well openings

Scelzi Contractor Flatbed Bodies are the perfect choice as work trucks for building work sites.

All Scelzi Contractor flatbed bodies share certain features and traits, including:

  • Standard body is painted white
  • Three point latching system on all compartment doors
  • Gas shocks on open top compartments and vertical doors
  • Super Contractor bodies have additional storage options
  • Stainless steel tubing around wheel well openings
  • Floor and side racks can be constructed of aluminum or wood
  • All Contractor bodies can be ordered with a standard or fork lift accessible material rack

Scelzi Contractor Flatbed Bodies are the perfect choice as work trucks for building work sites. The Super Contractor features an added top toolbox for extra storage.

All Scelzi Contractor flatbed bodies share certain features and traits, including:

  • Standard body is painted white
  • Three point latching system on all compartment doors
  • Gas shocks on open top compartments and vertical doors
  • Super Contractor bodies have additional storage options
  • Stainless steel tubing around wheel well openings
  • Floor and side racks can be constructed of aluminum or wood
  • All Contractor bodies can be ordered with a standard or fork lift accessible material rack
Supreme: Iner-City

Supreme sets the benchmark for cutaway truck bodies. Featuring a cab-access door, flat floor, and tight turning radius, our tough, sturdy Iner-City cutaway is ideal for shorter, multi-delivery routes, effortlessly carrying your cargo. Versatile and rugged, the Iner-City helps you get through the workday with dependable efficiency.

Supreme: Spartan Cargo

The Spartan Cargo is a cutaway that’s an excellent solution for multi-stop deliveries in cities and other tight places. The low-profile design and exceptional maneuverability make for a smooth ride. Practical and comfortable, with room to stand up straight inside, the Spartan Cargo is all business.

Supreme: Spartan Service Utility Van

Built to save time, the Spartan Service truck body delivers convenience. You’ll find compartments and custom shelving to keep you organized, and a large, bright work space that provides shelter from the elements while at the worksite. You can even work standing up inside, and the low-profile design allows easy access to your cargo and equipment.

CM Truck Beds: PL Model

The PL model is a platform body with an edge, featuring the strongest, most durable materials on the market with best-in-class features to get the job done.

    Specs & Features
  • Lengths: 12', 14', 16', 18'
  • Headache Rack: Formed Bulkhead with Punched Grill
  • Deck: 3/8" Treadplate
  • Frame Rails: 4" Structural Channel Steel
  • Crossmembers: 3" Channel Steel 18" OC
  • BP Hitch: ICC Optional
  • Side Rails: 3/8” x 2” Side Rails with Stake Pockets
  • Marker Lighting: Bullet DOT Approved LED
  • Toolbox: Optional Underbody
CM Truck Beds: RD Model

Built to work. Built to Last.

Tough enough to haul the big loads, the popular RD models are expertly designed, professional-grade workhorses that are sized to fit almost any unit.

  • Lengths 84", 8'6", 9'4", 11'4"
  • Headache Rack Steel Tube
  • Deck 1/8" Treadplate
  • Frame Rails 4" Structural Channel Steel
  • Crossmembers 3" x 3/16" Channel
  • Rear Skirt Solid One Piece with Tapered Corners
  • GN Hitch 30K B&W Hitch with Welded Ball
  • BP Hitch 18,500 lb. B&W Hitch with Receiver Tube
  • Side Rails 3/8” x 2” Side Rails with Stake Pockets
  • Fuel Fill Angled
  • 12V Trailer Plug 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
  • Rear Lighting Clear LED Oval
  • Light Box (Read Skirt) Steel
  • Marker Lighting Bullet DOT Approved LED
  • Toolbox Optional Underbody
  • Toolbox Handle N/A
  • Fenders N/A
  • Side Steps N/A
  • Tiedowns N/A
CM Truck Beds: SK Model
    Specs & Features:
  • Lengths: 84", 8'6", 9'4", 11'4"
  • Headache Rack: Steel Tube
  • Deck: 1/8" Treadplate
  • Frame Rails: 4" Structural Channel Steel
  • Crossmembers: 3" x 3/16" Channel
  • Rear Skirt: Solid One Piece with Tapered Corners
  • GN Hitch: 30K B&W Hitch with Welded Ball
  • BP Hitch: 18,500 lb. B&W Hitch with Receiver Tube
  • Side Rails: 3/8” x 2” Side Rails with Stake Pockets
  • Fuel Fill: Angled
  • 12V Trailer Plug: 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
  • Rear Lighting: Clear LED Oval
  • Light Box (Rear Skirt): Steel
  • Marker Lighting: Bullet DOT Approved LED
  • Toolbox: (4) Standard Integrated
  • Toolbox Handle: T Handle Compression
  • Fenders: Steel Radius
  • Sidesteps: In front of and behind fender
CM Truck Beds: TM Deluxe

The TM Deluxe is designed to haul trailers from bumper or gooseneck positions and features a full-length rear skirt and side skirts with stainless fenders, providing a sleek and finished look. Enjoy loads of convenient storage thanks to this hardworking body’s 6 lockable toolboxes, all featuring our best-in-class T-handle compression latches.

Specs & Features:

  • Lengths: 84", 8'6", 9'4", 11'4"
  • Headache Rack: Steel Tube
  • Deck: 1/8" Treadplate
  • Frame Rails: 4" Structural Channel Steel
  • Crossmembers: 3" x 3/16" Channel
  • Rear Skirt: Solid One Piece with Rear Step
  • GN Hitch: 30K B&W Hitch with Welded Ball
  • BP Hitch: 18,500 lb. B&W Hitch with Receiver Tube
  • Fuel Fill: Angled
  • 12V Trailer Plug: 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear
  • Rear Lighting: Clear LED Oval
  • Light Box (Rear Skirt): Steel
  • Marker Lighting: Bullet DOT Approved LED
  • Toolbox: Utility Box in front; Top-Open ½ Length Shovel Box; Tall Chain Box in rear; Opossum Belly
  • Toolbox Handle: Chrome T Handle Compression
  • Fenders: Steel Radius
  • Sidesteps: In front of and behind fender
  • Tiedowns: (4) 18" Airline Track Tiedowns, (4) Attachment Rings

DuraMag: S Series

The DuraMag® Service Body is designed for continuous hard work with full length, heavy duty, long sills. What separates this body from the competition is the understructure; the difference is stunning. The general body construction is fully welded—never riveted or screwed together. Our proprietary door extrusions, coupled with compression latches and automotive bulb seals, produce the most watertight compartments available. The black polymer door latches are rivet-less for additional protection. All vertical compartments incorporate nitrogen struts to optimize performance in cold environments.

All DuraMag® bodies are fully powder coated. All lights are factory wired and installed. NEW Swing Door Locking System

    Standard Features:
  • All Aluminum (6000 Series) Understructure with Extruded Box Tube
  • Swing Doors with Nitrogen Props on Vertical Compartments
  • Extreme Duty (6000 Series) .625 Interlocking Extruded Aluminum Floor
  • Welded Fender Flares for Superior Strength and Rigidity
  • Option Colors Available:
    • Black
    • Red GM/Dodge Red and Ford Red
  • 3/16 – Smooth Aluminum Compartment Tops and Inner Bed Walls
  • Adjustable Shelving in Front, Middle, and Rear Compartments (one shelf with dividers in each compartment)
  • Strongest Built Aluminum Service Body in the Industry
  • Heavy Slam Latch Tailgate with Stainless Steel Lock Rods
  • Black Polymer Rivetless Door Handles
  • Fully Welded Construction – No Rivets, Screws, or Bolts to Come Loose
  • Powder Coated – Standard: White
  • LED Marker Lights (where required)
  • LED Penny Light in Each Compartment
  • LED Ultra-thin 6” Round Stop/Turn/Tail/Backup Body Lights
  • Continuous Aluminum Piano Door Hinge
  • Pass-through Panel between Front & Center Compartments
  • Tread Plate Splash Guards on Front Wall – All Models
  • Best 10 Year Warranty in the Industry
Harbor: TradeMaster

From the glistening body finish to the Master Lock System designed to protect the tools of your livelihood, TradeMaster defines quality and value. If you are the best at what you do, why not drive the best? Harbor: Driven by the Best!

  • Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
  • Push Button locking system with red band locking indicator
  • Modern gas shocks on each side opening door to keep them open during loading and unloading
  • 8" deep recessed bumper for sure footing when entering bed
  • Armless and self supporting tailgate work table
  • Adjustable, but lockable, shelving system
  • Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
  • Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.
Harbor: Standard Contractor Body

Nearly half a century of cutting edge engineering has created this Standard Contractor model. But there is nothing standard about it! Our flawless well integrated overall design now comes with optional diamond plate steel or extruded aluminum decks and rear fold-down gates. It’s powder-coated head to toe. WOW!

    Standard Features:
  • Side loader rack with extra heavy duty 4x2 longitudinal bars that drop down 4-inches, meaning you can easily carry ladders, forms, or scaffolding.
  • Top deck mounted boxes, addressing a wide variety of storage needs.
  • Gates that fold down in the rear that creates both a work platform and an ease of loading and unloading of equipment into the bed area.
  • Dividable deck area between the space between the boxes, for heavy machinery such as compressors or welders, and the rear platform, for bags of concrete or a wheel barrel.
  • Stainless steel rear apron mounted between the dock bumper uprights , hiding the unsightly under-deck clutter.
Harbor: WorkMaster

The WorkMaster secures the tools of your trade unlike any other enclosed service body. Constructed with steel, built like a vault, the “walk-in” WorkMaster is designed for heavier-duty cutaway vans…and we have been known to mount them on a chassis or two. The WorkMaster is constructed in different lengths and heights to meet your every tool, material storage, and interior height (up to 6’3?) requirement. Need to carry more than your typical van? This is your truck!

  • Tightest security system in town, featuring double-bit keys and a Master Lock internal locking system
  • Modern gas shocks on each side opening door to keep them open during loading and unloading
  • Rear side access door for storage of conduit or other long (10-ft.) materials
  • 12" step bumper and side-wall grab handles for ease of entrance into the bed
  • Interior ladder storage on hooks mounted along inside shelf Weights up to 300 lbs. lighter than competing brands using FRP
  • Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
  • Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.
Harbor: ComboMaster

Nearly half a century of cutting edge engineering coupled with our obsession to create the perfect contractor body resulted in this design. You told us you want more space. So we created the ComboMaster series which boasts more work and storage space than any comparable contractor body in its class. Want a super-mega version? Ask about our Maxi Combo.

    Standard Features:
  • 36-inch Rear platform with fold-down 10-inch and two 33"Lx 10"H x 19"D under-deck storage compartments.
  • Overcab rack legs attach to the back of the horizontal compartment, giving extra work room on the platform, yet able to store a 15-ft. ladder with ease.
  • Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
  • Push Button locking system with red band locking indicator
  • Modern gas shocks on each side opening door to keep them open during loading and unloading
  • 8" deep recessed bumper for sure footing when entering bed
  • Adjustable, but lockable, shelving system
  • Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
  • Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.
    Options:
  • Conduit Boxes
  • Rack straps that ratchet to 500 lb. pressure
  • Master Lock system
  • AOK (All-One-Key) Locking. Makes your ignition key locks everything!
  • Hitches that integrate with the bumper brackets
  • Spray-On Bedliner
  • Vise Brackets and Pipe Holders
  • Multiple roll-out drawer packages and slide-out trays
  • Light bars, beacons, work lights, and other lighting options
  • 110-Volt Electrical Inverters
  • Rear Back-Up Alarm
Harbor: Black Boss Stake Bed

Platform bodies promise unyielding quality and reliability. Whether your business is hauling stuff or you’re hauling stuff for business, these platform bodies go the distance!

    Standard Features:
  • Choice of diamond/smooth plate steel deck, aluminum iso-mounted deck, or 7/8" hardwood apitong deck (apitong deck only available for CA, AZ, and NV customers)
  • Square turret-punched headboard, made of a tough 12 gauge galvanized sheet and 2" x 2" tubular frame
  • Stainless rear apron between the dock bumper uprights to hide unsightly clutter under the bed
  • Glossy black coating